worm motor
A robust worm-travel gearbox powered by an MM28 electric motor. Ideal applications where a simple to fit, high torque outcome is required. Ideal for student based assignments including robots and buggies.
The unit has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The motor is snap installed into its cradle to activate the gear and worm.
\u041f\u0430\u0434\u0440\u0430\u0431\u044f\u0437\u043d\u0430\u0441\u0446\u0456
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and additional applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, also at very low voltages. We recommend that you use stall-detection sensors, or just view your robot, to make sure that it doesn\u2019t stall for more than a few seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on the smaller threaded end of the shaft, though it is not particularly designed to work with this type of shaft (the hub\u2019s set screw could damage the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct angle worm geared motors set new standards for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design provides for easy integration now and a truly future proof answer. The Ever-Power gear motor offers total flexibility in mounting options includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in option positions rotated in 90\u00ba steps around the motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total alternative for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outside or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the output shaft of the unit.
\u0410\u0441\u0430\u0431\u043b\u0456\u0432\u0430\u0441\u0446\u0456 \u043f\u0440\u0430\u0434\u0443\u043a\u0442\u0443
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50\/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the answer for applications requiring a good part turn, optional dual result, or an inability for the electric motor to be back again driven. The DC correct angle gear motors are created for constant and intermittent duty operation. Our right angle equipment reducers were created with a number of mounting plate options, making them perfect for a number of DC motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1\/43 to 3\/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a small package size. Worm Gear Motors are great for applications that want a self- locking or breaking characteristic since the result shaft can\u2019t rotate when there\u2019s no power used. Also, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision slice gears, voltages and sizes, EP Items includes a DC Worm Equipment Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking \/ Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
\u041d\u0456\u0437\u043a\u0456 \u045e\u0437\u0440\u043e\u0432\u0435\u043d\u044c \u0448\u0443\u043c\u0443
Flexible Configuration
\u041f\u0440\u044b\u043a\u043b\u0430\u0434\u0430\u043d\u043d\u0456
Protection Door Locks \/ Industrial Conveying Systems \/ Security Gates \/ Dental care Chairs \/ Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Items will continue to work with you to design and manufacture a Worm Gear Electric motor that may optimize the performance of your unique application.
Built to your unique requirements
Motor Type: Brushed \/ Brushless \/ Coreless
\u041d\u0430\u043f\u0440\u0443\u0436\u0430\u043d\u043d\u0435
\u0412\u044b\u0445\u0430\u0434\u043d\u0430\u044f \u0445\u0443\u0442\u043a\u0430\u0441\u0446\u044c
\u041c\u0430\u0433\u0443\u0442\u043d\u0430\u0441\u0446\u044c
\u0411\u044f\u0433\u0443\u0447\u044b
\u041a\u0440\u0443\u0442\u043e\u045e\u043d\u044b \u043c\u043e\u043c\u0430\u043d\u0442
\u041a\u0430\u044d\u0444\u0456\u0446\u044b\u0435\u043d\u0442 \u0437\u043d\u0456\u0436\u044d\u043d\u043d\u044f
Shaft Material & Size
\u041c\u0430\u0442\u044d\u0440\u044b\u044f\u043b \u0448\u0430\u0441\u0446\u044f\u0440\u043d\u0456
Shaft Configuration: (D Cut \/ Round \/ Splined \/ Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical \/ Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for durability and a high torque output. Due to the special mechanical structure of the worm get the motor output shaft is definitely self locking and will not be rotated.
![](\"http:\/\/gearboxes-worm.xyz\/wp-content\/uploads\/2020\/03\/worm-motor.jpg\")
This part uses a two wire connection and supports direction control as well as PWM speed control. Ranked voltage is 12v and can obtain 40RPM, with a torque of 8kg\/cm.\u0421\u041f\u0415\u0426\u042b\u0424\u0406\u041a\u0410\u0426\u042b\u042f
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg\/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear products from EP DRIVESYSTEMS especially display their power in applications where large gear ratios are essential. Our worm geared motors are consequently optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to meet your needs.
Worm gear systems impress with their large power density and compact style. If required, we can also source them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP casing, you can expect an extensive type of bolt-on components to customize the merchandise including torque arms, shaft covers and output flanges. These could be easily field installed, but we will also be glad to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm gear unit SMI
SMI worm gear models feature a simple, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes this product preferably suited for harsh and demanding industries like food processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides numerous fixing possibilities and enable a simple assembling for the client.
Various other drive configurationscan be designed by use of built-on components (e.g. torque arm and output flanges). The housings are created in light weight building out of aluminium die cast. Motor attachment is realised generally through IEC adapter B5 or B14A.
\u0422\u044d\u0445\u043d\u0456\u0447\u043d\u044b\u044f \u0434\u0430\u0434\u0437\u0435\u043d\u044b\u044f
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly\/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm large, 40mm high, a good robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where a simple to match, high torque result is necessary, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, perfect for student based projects including robots and buggies.
Most suitable for applications where an easy to fit, high torque end result is required
Ideal for student based tasks including robots and buggies
Reversible Huge torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Substantial torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
\u0410\u0441\u0430\u0431\u043b\u0456\u0432\u0430\u0441\u0446\u0456:
The engine is Gear DC motor with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that is, in the case of motor without electrical, the productivity axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion.
\u0422\u044d\u0445\u043d\u0456\u0447\u043d\u044b\u044f \u0445\u0430\u0440\u0430\u043a\u0442\u0430\u0440\u044b\u0441\u0442\u044b\u043a\u0456:
Model: JGY370
Voltage: DC12V
No load speed: 40r\/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. Why is worm gear so special? Check this wiki out: Worm Travel.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs output shaft) is not reversible when using large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually an individual start (one spiral) worm is used. This can be an advantage when it’s desired to get rid of any probability of the result driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g<\/p>\n