نمای کلی
جزئیات سریع
- محل مبدا:
-
ژجیانگ، چین
- نام تجاری:
-
آموزش زبان انگلیسی با EPT
- شماره مدل:
-
16:1 12:1 10:1
- قدرت نامی:
-
11/12/15 کیلووات
- ترتیب چرخ دنده ها:
-
Worm gear and worm
- گشتاور خروجی:
-
800/900 نیوتن متر
- سرعت ورودی:
-
۱۵۰۰ دقیقه
- سرعت خروجی:
-
۱۵۰۰ دقیقه
- دمای کار:
-
among-40℃till+40℃
- فاصله مرکز:
-
125
- وزن:
-
۵۱ کیلوگرم
- Power voltage:
-
220V,380V
- مواد:
-
high-strength aluminium alloy
- نام:
-
high quality electric motor planetary speed reducer gearbox gear motor
- گواهی:
-
CCC CE ISO SGS
- ویژگی:
-
construction lift building hoist usage
- جنس شفت:
-
فولاد کروم
- کاربرد:
-
Worm Reduction gearbox
توانایی تامین
- توانایی تامین:
- 10000 Set/Sets per Month Worm Reduction gearbox
بسته بندی و تحویل
- جزئیات بستهبندی
- High speed Servo Hydraulic Manual Automatic transmission 12V Electric DC Motor Planetary Worm Reduction gearbox for sale packed by wooden case
- بندر
- شانگهای
-
زمان سرب
: - حدود 7-15 روز پس از دریافت T/Tpayment
سفارشیسازی آنلاین
High speed Servo Hydraulic Manual Automatic transmission 12V Electric DC Motor Planetary Worm Reduction gearbox for sale
مرور کلی محصولات
توضیحات محصول
توضیحات محصول
A.The features of high quality electric motor planetary speed reducer gearbox gearmotor/gear reductor/gearbox
1. The reducers have the following features because of using plane enveloping worm gear as compared with other kinds of worm transmissions: larger loading capactiy and compact dimension and higher efficiency and smoother and quieter functioning longer service life.
2. In addition, the housings of these series reducers are made of high-strenghth aluminium alloy. So the reducers make the features of higher strength and lighter weight.
3.It is recommended to utilize the viscosity VG320 synthetic worm gear oil (or synthetic gear oil) for lubrication. Once the environment temperature is higher than 30°C, it is recommended to utilize the viscosity VG460 synthetic worm gear oil
(or synthetic gear oil) for lubrication. And allowed maximum working oil temperature is 100°C.
| شماره | وزن | Transmission Ratio |
فاصله مرکز (میلیمتر) |
توان خروجی (کیلووات) |
دستورالعمل سفارش |
| 1 | ۵۰ کیلوگرم | 1:16 | 125 | 11.6 |
لطفا مشخص کنید نسبت انتقال و نوع هنگام سفارش |
| 2 | 1:18 | 125 | 10.3 | ||
| 3 | 1:14 | 125 | 11.72 |
B.installation of cheap gearbox prices for lifting machinery, worm gearbox :
1.The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
2.The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3.The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
4.Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
5.While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
6.When ordering or using all kinds of WPD type, if the motor weight is bigger than the common,supporting set is required.
C.usage of cheap gearbox prices for lifting machinery, worm gearbox :
1.Before using,please check carefully whether the reducer modle, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.
2. According to the requirement of selecting lubricant oil in the product manual. Please fill proper category and brand lubricant.And then screw on the vent-plug, unlock the small cone-plug of vent-plug.Only after doing these, reducer is already for startinh up running.The proper brand and adequate lubricant oil is required, replacing oil in time conforming to the request of product manual is also necessary, especially after using first 100hours, it is required refilling new oil.
3. When abnormal circumstances occur, please stop and check reducer per solutions and reasons for faults of reducer(allowable highest oil temperature is 95, under this temperature limit, if oil temperature no more goes up, please let reducer continue running).
جریان تولید
خدمات ما
|
راهکارهای قطعات سفارشی Ruibiao specialize in design, custom and manufacture electric motors,including rack and pinion,Suspended platform,electric motor,Gearbox,safety device,elevator Overload Sensor,winch,cable,Limit Switch,worm gear.All of them can befully and easily customized (see some of the many customization options listed below). We committed to offer high quality, high performance, cost effective optionstomeet customersspecific demands.Choosing to customize one ofthe construction hoist spare partsin our Product Categories now! |
نظرات موافق
High speed Servo Hydraulic Manual Automatic transmission 12V Electric DC Motor Planetary Worm Reduction gearbox for sale
