This standard selection of Servo-Worm Reducers are ideal for use in applications that demand powerful, precise positioning and repeatability. These were specifically developed for make use of with state-of-the-art servo electric motor technology, providing tight integration of the engine to the machine. Angular backlash of significantly less than 1 arc-a few minutes is provided standard.
They are available in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of engine couplings and mounting flanges are available for assembly to virtually all servo motors, and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.
Standard applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for valuable installation space.
The helical-worm servo gearmotors were created so that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you excellent attenuation properties for the operation of your systems with low degrees of 
vibration. This is definitely due to the longitudinal application of force on the insight shaft. This enables torque impulses to be prevented efficiently and for maximum results with regards to running smoothness and sound reduction to be achieved.
Both the gear unit, and the synchronous servomotor are based on our modular system. This allows you to have fully individual configuration possibilities for each application. One factor is certain – Our servo gearmotors are real specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a equipment in the kind of a screw, also referred to as a worm, meshes with a worm equipment. These gears are usually created from bronze and the worms are steel or stainless steel.
While worm gears act like a spur equipment, the worm gearboxes are considerably smaller than other equipment reduction boxes. A principal benefit of worm equipment reducers is usually that they create an output that is 90° from the input and can be utilized to transmit higher torque or decrease rotational speed. Most often, a worm gearbox provides right hand threads; to improve the direction of the output, a left-hands thread worm gearbox is necessary.
Sometimes a motor’s capability may be limited to the main point where it requires gearing. As servo manufacturers develop better motors that can muscle tissue applications through more difficult moves and create higher torques and speeds, these motors need gearheads equal to the task.
Do you wish to know even more about servomoteur à entraînement par vis sans fin?
