Panoramica
Dettagli rapidi
- Luogo di origine:
-
Zhejiang, Cina
- Nome del marchio:
-
EPT
- Numero di modello:
-
WP WPA WPO
- Potenza nominale:
-
0.05-419kw
- Disposizione degli ingranaggi:
-
Verme
- Coppia di uscita:
-
2-3022 Nm
- Velocità di ingresso:
-
1000~3000 giri/min
- Velocità di uscita:
-
0,3-419 giri/min
- connection type:
-
shaft or flange
- Colore:
-
Come richiesto
- Two Stages:
-
WPE
- stage:
-
single,double
- Skype:
-
marcia19860307
- Mobile No.:
-
0086-13655450504
- Nome del prodotto:
-
wp100 worm gear speed reducer transmission gearbox
- Coppia di uscita::
-
2-3022 Nm
- Output Speed::
-
0,3-419 giri/min
- Rated Power::
-
0.05-419kw, 0.05-419kw, 0.05-419kw, 0.06-7.5KW
Capacità di fornitura
- Capacità di fornitura:
- 100 serie/serie al giorno
Imballaggio e consegna
- Dettagli sulla confezione
- Plywood
- Porta
- Tsingtao
Personalizzazione online
China Guomao industrial motor wormwp100 worm gear speed reducer transmission gearbox
Certificato
Data
Photo
Picture
wpa reduction gearbox
1.Model40-250
2.Ratio:1:5-1:100
4.ISO9001,Warranty-1 year
5.Delievery on tim
Processo di un ordine:
A. Modello/Dimensione B. Rapporto di trasmissione C. Direzione dell'albero D. Quantità ordinata.
1. Please check product detailed information above.
2. Our Export Service Team will contact you with a quotation file within 3 hours after our team get your enquiry.
3. When you place an order, our team will confirm with you about color, package,method of payment and delivery,
quindi ti verrà inviato un contratto di vendita per conferma.
4. Packing: Carton and Wooden Case.
5. How to delivery:
By sea – Buyer appoint forwarder, or our sales team find suitableforwarderfor buyers.
By air – Buyer offer collect express account,or our sales team find suitableexpressfor buyers.(Mostly for sample)
Altri – Organizziamo la consegna della merce in un luogo in Cina indicato dagli acquirenti.
Processing machine
notice of installation
(1) The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
(2)The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
(3)The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
(4) Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
(5)While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
(6)When ordering or using all kinds of WPD type, if the motor weight is bigger than the common, supporting set is required.
notice of usage
(1)Before using, please check carefully whether the reducer model, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.
(2) According to the requirement of selecting lubricant oil in the product manual. Please fill proper category and brand lubricant. And then screw on the vent-plug, unlock the small cone-plug of vent-plug. Only after doing these, reducer is already for starting up running. The proper brand and adequate lubricant oil is required, replacing oil in time conforming to the request of product manual is also necessary, especially after using first 100hours, it is required refilling new oil.
(3) When abnormal circumstances occur, please stop and check reducer per solutions and reasons for faults of reducer(allowable highest oil temperature is 95, under this temperature limit, if oil temperature no more goes up, please let reducer continue running).
Plywood
