Power UNITS FOR DOUBLE-SCISSORS LIFT

General Description
Equipped with all the zero leak bidirectional checking sole-noid valves, this electrical power unit is designed for the operation of two independent circuits. Which are respectively for the key and subordinate platforms on the double scissors lift. Two cut-off valves are used for lowering the machine manually in situation of electrical power loss. If a lot more independent circuits are needed to your application please speak to us for availability.
Remark: one. Please check with our income engineer to the unique pump displacement, motor electrical power or tank capacity.
two. CSA or UL licensed motors can be found on request.
Exclusive Notes
one. The AC motor is of S3 duty cycle, which can only get the job done intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all of the hydraulic parts concerned ahead of installation of the electrical power unit.
three. Viscosity of your oil shoud be 15~46 cst,and also the oil should really be clean and no cost of impurities,N46 hydraulic oil is advisable.
four. The power unit ought to be mounted vertically.
five. Check the oil level inside the tank after the first working of the electrical power unit.
six. Oil shifting is required just after the preliminary 100 operation hours,afterwards when each 3000 hrs.